Resetting The System; Using The Language Code List - Pioneer HTZ-575DV Mode D'emploi

10 Additional information
Message
HDMI ERR
USB ERR
EEP ERR
EXIT

Resetting the system

Use the front panel controls to reset all system
settings to the factory default.
With the system on, press  STANDBY/
•
ON while holding down  USB.
The next time you switch on, all the system
settings should be reset.
48
En
Description
• See HDMI connection above for troubleshooting tips. See also Resetting the
HDMI connection on page 36 if the problem persists.
• See Important in Using the USB interface on page 26 for more on this.
• Contact your Pioneer authorized service center or your dealer for servicing.
• Appears when any prohibited signal is input or the headphones are connected
while the menu screen is displayed, and then the display returns to the normal
display.

Using the language code list

Some of the language options (see Language
settings on page 31) allow you to set your
preferred language from any of the 136
languages in the Language code list below.
1 Select 'Other Language'.
Use / to select either a code letter or
2
a code number.
Use / to select a code letter or a code
3
number.
See the Language code list below for a
complete list of languages and codes.