Additional Information; Optional System Settings; Setting The Sleep Timer; Dimming The Display - Pioneer HTZ-575DV Mode D'emploi

10

Additional information

Chapter 10
Additional information

Optional system settings

All the available settings in the standby setup
menu are listed below. See the notes in each
section for more information about the settings.
The first setting in each section is the default.
1 Switch the system into standby.
Press SHIFT+SETUP and use / then
2
ENTER to choose the setting you want to adjust.
The available settings are shown in the front
1
panel display.
Use / to adjust then press ENTER to
3
confirm and exit.
System demo setting
Switches the automatic demo feature on or off
(this starts when you plug in for the first time):
• DEMO ON – Switches the demo feature on.
• DEMO OFF – Switches the demo feature off.
Frequency step setting
If you find that you can't tune into stations
successfully, the frequency step may not be
suitable for your country/region.
• AM 9K
• AM 10K
DTS CD setting
If you play a DTS-encoded CD, you will need to
change this setting to hear the decoded signal.
• NORMAL – Regular CD playback; some
DTS-encoded CDs output a noisy signal.
• DTS-CD – Proper decoding of DTS-
encoded CDs; the beginning of regular CD
tracks may be skipped.
Key lock setting
• LOCK ON – Makes the front panel buttons
and controls inoperative.
• LOCK OFF – Restores regular use of the
front panel buttons and controls.
Note
1 The setup menu is exited automatically after 5 minutes of inactivity.
2 The display dims when the sleep timer is set.
38
En

Setting the sleep timer

The sleep timer switches off the system after
about an hour so you can fall asleep without
2
worrying about it.
• Press SLEEP repeatedly to select an
option.
Choose between the following options:
• SLP ON – Switches off after about an hour
• SLP OFF – Cancels the sleep timer
After selecting SLP ON, you can press SLEEP
again to check how much time is left. Each line
indicates approximately 12 minutes
(remaining):
S L P - - - - -

Dimming the display

You can adjust the brightness of the text in the
front panel display.
Press SHIFT+SETUP and use / to
1
select DIMMER then press ENTER.
Use / to adjust then press ENTER to
2
confirm and exit.
• LIGHT – Brighter setting
• DARK – Darker setting