Pioneer AVIC-Z130BT Manuel D'installation page 11

Connecting the system
The navigation unit
Fuse (10 A)
RCA connector
Power cord
Yellow/black
If you use equipment with a mute
function, connect that equipment to
the Audio Mute lead. If not, keep the
Audio Mute lead free of any
connections.
Note
Audio source will be set to mute or attenuate, while
the following sounds will not be muted or
attenuated. For details, refer to Operation Manual.
— Voice guidance of the navigation
— Incoming ring tone and incoming voice of the
cellular phone that is connected to this navigation
system via Bluetooth wireless technology
— When the voice recognition mode is
activated.(AVIC-Z130BT only)
Blue/white
To auto-antenna relay control terminal.
If the vehicle has a glass antenna, connect
to the antenna booster power control
terminal (max. 300 mA 12 V DC).
15 cm (5-7/8 in.)
Section
02
11
En