Wet Vacuuming; Cleaning - Rotel Accucleaner Wet'n'dry U606CH1 Mode D'emploi

• WET VACUUMING

Empty the bin and then use the appliance as you did with the dry vacuuming process,
o
but insert the wet suction nozzle (F1)
The container can carry about a quarter of a litre of liquid.
o
Empty the container before the liquid has reached the limit of the intake opening.
o
For hygienic reasons, the bin (A), the filter cartridge (G7) and the filter (G4-6) should
o
always be washed after wet vacuuming. Allow to dry thoroughly before assembling
the parts.

• CLEANING

You can only get the best suction power when the filter (G4-6) is clean and dry. The
o
more you use the appliance, the more frequently you should clean and maintain the
filter.
Open the bin (A) by pressing the button (B) (see Fig. H).

Remove the filter cartridge (G7) and clean it, if necessary, with a damp cloth.

The filter (G4-6) can be released by turning the filter cartridge (G7) counterclock-

wise.
If you are cleaning really dirty areas, the filter can be cleaned with lukewarm

water and washing up liquid. Let the filter dry thoroughly before putting it back
in.
Fit the filter (G4-6) back into the filter cartridge (G7) by turning it clockwise. Make

sure that the marking on the filter lines up with the arrow on the filter cartridge
(see Fig. K).
Put the filter cartridge back in and close the bin.

To make sure your vacuum cleaner maintains its optimum performance, we rec-

ommend that you replace the filter once a year. You can purchase replacement
filters from your retailer or directly from the company Rotel AG (spare part no.
260.600.0017).
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
24