Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MOUNTING THE WALL BRACKET (F)
o
Choose a sheltered spot on a wall near an electric plug socket. Mark out where the
holes are going to go, drill the holes and attach the wall mount with the screws
supplied. The two nozzles (H-J) can fit on the wall mounting, too.
BEFORE STARTING THE VACUUM CLEANER
o
The battery cells in new appliances are not charged yet. That is why you must
charge up the vacuum cleaner for about 10 hours before its first use. After which,
the appliance will have reached its full capacity.
o
To make sure that the vacuum cleaner is ready for use at all times, you can charge it
again immediately after using it.
Caution: To avoid reducing the operating time of the appliance, we recommend
that you discharge the appliance completely from time to time, after which the
battery must be charged again for 10 hours.
CHARGING THE APPLIANCE
o
Put the vacuum cleaner in the charging station (F). This automatically connects it to
the power supply.
o
Connect the charger plug to a 230 V socket. When the red charging light (D) lights
up, it means that the appliance is being charged.
o
Whilst it is charging, the charger plug may become warm, this is completely normal.
It is not possible to overcharge the battery.
DRY VACUUMING
o
Turn the appliance on (C) and clean the surface or object. To remove dust from
crevices, skirting boards, corners, drawers, etc., you can use the rigid crevice tool (I).
WET VACUUMING
o
Empty the bin and then use the appliance as you did with the dry vacuuming
process, but insert the wet suction nozzle (J)
o
The container can carry about a quarter of a litre of liquid.
o
Empty the container before the liquid has reached the limit of the intake opening.
o
For hygienic reasons, the bin (A) and the filter (G) should always be washed after
wet vacuuming. Allow to dry thoroughly before assembling the parts.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
Publicité
Table des Matières
