Care And Maintenance - BERG Champion 270 Mode D'emploi

Masquer les pouces Voir aussi pour Champion 270:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Care and maintenance

Keep this manual as reference for instructions and maintenance.
The BERG trampoline is manufactured using high-quality materials and is intended for many years of
enjoyment. Proper maintenance and good care guarantee a long lifespan and assists in preventing
injuries.
The following guidelines should be observed.
Inspect the BERG trampoline before each use according to the assembly manual and replace broken,
worn out or missing parts. Ignoring these inspections and neglecting regular maintenance can lead to
dangerous situations and risks for the user.
Pay attention to the following:
• The condition of the joints of the frame components (broken welds or bent frame).
• Check the bolt connections to make sure they are still fixed and tighten again if needed. Check the
connections (push pins) to make sure they will not become loose while jumping.
• The condition of the springs (broken or extensively stretched springs) and the connection of the
springs to the frame and the jump mat. Springs and the suspension of springs are subject to wear,
replace worn parts in due time.
• The condition of the jump mat. The jump mat wears by use and by exposure to sunlight (UV
radiation). Replace the jump mat in due time when the condition deteriorates.
• Missing, improperly positioned, or insecurely attached protective padding.
• Punctures, frays, tears, or holes worn in the mat or protective padding.
• Deterioration in the stitching or fabric of the mat or protective padding.
• Sharp protrusions on the frame.
When the trampoline is not used for short periods it could be covered with a BERG Weather Cover, which
for example makes sure that the trampoline will stay free of leaves and twigs. When the trampoline is not
used for a longer period (e.g. during the winter) we recommend to store the trampoline but certainly the
protective edge on a dry location for a longer life of the product.
If the trampoline has to be moved, due to required maintenance of the current location or other reasons,
disassemble the anchors (if any) and move the trampoline. Lift up the trampoline with three grown
men, by lifting the trampoline at the top rails and move to the new location. If the trampoline needs to
be relocated over a greater distance, disassemble the trampoline, pack the components in the original
packaging and assemble again at the new location.
You can clean the jump mat and the padding with a cloth and cold water. NEVER use solvents,
dishwashing liquid, detergent or hot water.
Modifications or changes to the trampoline are not allowed. This will endanger the safety. Only changes
BERG Champion

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Champion 330Champion 380Champion 430Champion 430 tattoo

Table des Matières