Télécharger Imprimer la page

Wolf Garten Accu 75 Mode D'emploi page 14

Publicité

ccessories
Order description
C-TS
Telescopic handle
ccu 8 EM
Shear blade
ccu 10 EM
Shear blade
ccu BS EM
Shrub blade
C-R
Replacement blades
ccu
ccu
ccu
Telescoping handle C-TS (figure Z1)
To fasten the telescopic handle place the end piece as far as possible in the rechargeable shears
until the telescopic handle locks into place. Loosen the telescopic handle height adjustment (pos.
2) and then adjust to the desired working height (pos. 3). Retighten the telescopic handle height
adjustment (pos. 2) by turning it. For loosening the telescopic handle from the rechargeable
shears, the button (pos. 1) must be pushed down and the handle pulled out.
Powering on/off
1. Press button (4a).
2. Press button (4b).
3. Release button (4a).
4. Power off shears: release button (4b).
Replacement wheels C-R (figure Z2)
Place the wheels under the rechargeable shears as shown the in the graphic. Then press the
wheels into the recesses in the shears.
Guarantee terms
Please carefully retain the guarantee card completed by the seller, or the proof of purchase.
The company WOLF-Garten provides a guarantee for 24 months from the date of purchase. This guarantee is in
accordance with the relevant state of technology and the utilisation purpose / area of application.
The consumer's statutory rights are not affected by the following guarantee guidelines.
Pre-conditions for the 24-month guarantee entitlement:
-
Deployment of the device solely for private use.
The guarantee is reduced to 12 months in the commercial sector or leasing business.
-
Proper handling and observance of all information given in the operating manual, which forms part of our
guarantee terms.
-
Observance of the prescribed maintenance intervals.
-
No unauthorised alteration of the design.
-
Installation of original WOLF replacement parts / accessories.
-
Presentation of the completed guarantee card and/or proof of purchase.
This guarantee does not extend to normal wear-and-tear on blades, blade mounting components or friction disks,
V-belts/toothed belts, running wheels/tyres, air filters, spark plugs and spark plug connectors. ny guarantee claim
shall be immediately void in the event of unauthorised repairs. Faults and defects which can be traced to material
or manufacturing faults will be rectified exclusively by our contracted workshops (the seller has the right to remedy
a defect) in your vicinity, or by the manufacturer if the latter is closer. ny claims going beyond the provision of a
guarantee are ruled out. There is no entitlement to a replacement. ny transport damage should be reported not to
us but to the shipper in question since, otherwise, any compensation claims vis-à-vis the shipper would be voided.
Item
number
Continuously adjustable from 85-120 cm. Result:
7095 000
convenient trimming without stooping.
7084 095
Cutting width 80 mm
7085 095
Cutting width 100 mm
7095 095
Length 170 mm
Result: The wheels achieve a consistent cutting
7084 094
height
7084 055
Replacement batteries
7085 055
Replacement batteries
7086 055
Replacement batteries
Product information
14
Used for
ccu 45, ccu 60,
ccu 75, ccu BS 60
ccu 45, ccu 60,
ccu 75, ccu BS 60
ccu 45, ccu 60,
ccu 75, ccu BS 60
ccu 60, ccu 75,
ccu BS 60
ccu 45, ccu 60,
ccu 75, ccu BS 60
ccu 45
ccu 60
ccu 75, ccu BS 60

Publicité

loading

Ce manuel est également adapté pour:

Accu 60Accu 45Accu bs 60