Evolite Air Série Mode D'emploi page 30

29
30
31
32
33
34
Auto Master / Slave Mode in WDMX (Wireless DMX):
It is possible to use your moving head in automatic and sound mode by transmitting the signal from a
moving head to the wireless one.
To do this, select Master from the Auto Run menu of your Master lyre, then select WDMX IN & OUT
from the Signal Set menu.
The slave moving head must be set in DMX mode address 001 and the WDMX IN & OUT function
activated in the Signal Set menu.
Remember to select the same group of frequencies on the back of your moving head (colored LEDs).
You can also use a cable from your controller to the first moving head, and transmit the DMX signal by
wireless to the other units.
Air Wash 1910z User's Manual Ver. 1.00
White in pixel 2
0..255 White in pixel 2 saturation control(0-100%)
0..255 Red in pixel 3 saturation control(0-100%)
Green in pixel 3
0..255 Green in pixel 3 saturation control(0-100%
Blue in pixel 3
0..255 Blue in pixel 3 saturation control(0-100%)
White in pixel 3
0..255 White in pixel 3 saturation control(0-100%)
0..255 Red in pixel 4 saturation control(0-100%)
Red in Pixel 3
Red in Pixel 4
30
Page