Evolite Air Série Mode D'emploi page 22

Clamp Mounting:
Air wash 19x10z provides a unique mounting bracket assembly that integrates the bottom of
the base, and the safety cable rigging point in one unit (see the illustration below). When
mounting this fixture to truss be sure to secure an appropriately rated clamp to the included
omega bracket using a M10 screw fitted through the center hole of the "Hanging Kit". As an
added safety measure be sure to attached at least one properly rated safety cable to the fixture
using on of the safety cable rigging point integrated in the base assembly
22
Air Wash 1910z User's Manual Ver. 1.00 Page