Skil PWRCORE 20 Guide D'utilisation page 14

NOTICE: Attach the accessory in the desired
orientation for the task at hand. The shaft is
configured so that most application tools can
be installed around the tool in 30° increments
(Fig.7).
WARNING
blade, rigid scraper blade, or carbide grout-
removal blade so that they face backwards,
as attachments in this position may cause
serious injury.
WARNING
the lock pattern of accessories fit each
other. Misalignment can lead to unstable
attachment and cause personal injury.
WARNING
Blade, Rigid Scraper Blade, and Carbide
Grout-Removal Blade should never be
attached so that they are facing backwards,
as operation in this position may cause
serious injury (Fig. 8).
To Remove the Accessory
a. Make sure that the ON/OFF switch is in the OFF position and remove the battery pack.
b. Loosen the Clamping Screw with washer by the hex key provided.
c. Remove the accessory from the tool.
14
Do not attach the plunge-
cut blade, flush circular
Make sure that the ribs of
the tool drive shaft and
The Bi-Metal Plunge
Blade, Flush Circular
Fig.7
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
Fig.8