Overview; Installation - EuroLite Safety Mirrorball 30 Mode D'emploi

If this mirror-ball will be operated in any way different to the one described in this manual, the product may
suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
crash etc.

OVERVIEW

INSTALLATION

Please consider the EN 60598-2-17 and the respective national norms during the
installation! The installation must only be carried out by an authorized dealer!
The installation of the mirror ball has to be built and constructed in a way that it can hold 10 times the weight
for 1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment. This secondary safety attach-
ment must be constructed in a way that no part of the installation can fall down if the main attachment fails.
When rigging, derigging or servicing the fixture staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
(1) Mirrorball motor
(2) Motor axle
(3) Screw-on chain link
(4) Mirrorball chain
(5) Installation eyelet
(6) Mirrorball
(7) Attachment eyelet
(8) Safety chain
(9) Attachment eyelet
DANGER TO LIFE!
8/18 00008332.DOC, Version 3.0