Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operate the spot only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the spot. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the spot! Rather use a soft and damp cloth.
Please use the original packaging if the spot is to be transported.
Please consider that unauthorized modifications on the spot are forbidden due to safety reasons!
If this spot will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.
OVERVIEW
INSTALLATION
Installing/Replacing the lamp
Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
14/31
(1) Colour filter frame
(2) Tube
(3) Mounting-bracket
(4) Extension spring
(5) Housing cover
(6) Mounting bracket screws
(7) Clip-to-hold clamps
50850340_V_1_1.DOC
Publicité
Table des Matières
