Storage - John Bean T1545 Manuel D'utilisation

R
G
T
6.0-3
T1545T
H. Check and discharge the water every day from air fi lter/
water separator 'F'. Do this by pulling down the fi tting "S"
(Fig. 6.0-5).
I. The machine is equipped with an automatic lubricator.
Check the oil level weekly. When adding oil to the
lubricator, disconnect the air supply fi rst, and add oil as
needed. Make sure seals are in place when repositioning
the cup.
WARNING!
PAY ATTENTION TO KEEP FILLED THE OIL TANK OF
THE OILER, EXPECIALLY FOR AIR MOTOR OPERATED
F
MACHINES.
USE ONLY OILS FOR AIR DEVICES, DO NOT USE
BRAKE FLUID OR OTHER NON RECOMMEND
S
LUBRICANTS.
Suggested oils for the fi lter/lubricator unit:
WHITE MINERAL OIL: 15 cSt
TAMOIL
SHELL : ONDINA OIL 15
BP
TOTAL : LOBELIA SB 15
ESSO
J. Periodically check the lubricator effi ciency. One oil drop
(G, Fig. 6.5) every 4-5 operations of the bead breaker
indicates that the correct amount of oil is being dispersed
in the system.
If necessary adjust the oil fl ow with screw (R, Fig.6.0-5).
K. If the machine is also equipped with a beading unit
for tubeless tires, drain condensation from the tank daily.

6.1 Storage

In case the machine is not to be used for a long period of
time (6 months or more) it is necessary to disconnect all
power sources, discharge the bead seater tank (only GP
version), protect all parts that may be damaged, protect
the air hoses that may be damaged by the drying process.
When putting the machine back in operation, check fi rst
the condition of all previously protected parts, and check
for correct functioning of all devices before using the
machine again.
: WHITE MINERAL OIL 15
: ENERGOL WT3
: MARCOL 82
27
EN -