Guarantee / Liability; Conformity Declaration; Disposal - Multiplex TEK-Vario + TAS Notice D'utilisation

7.1 Guarantee / liability exclusion
The company of MULTIPLEX Modellsport GmbH & Co. KG accepts
D
no liability of any kind for loss, damage or costs which are in-
GB
curred due to the incorrect use and operation of the product, or
are connected in any way with such use and operation. Unless
otherwise prescribed by binding law, the liability of MULTIPLEX
Modellsport GmbH & Co. KG to pay compensation, regardless of
the legal argument employed, is limited to the invoice value of
that quantity of goods made by MULTIPLEX Modellsport GmbH
& Co. KG which was immediately involved in the event in which
the damage occurred. This does not apply if MULTIPLEX Modell-
sport GmbH & Co. KG is deemed to have unlimited liability in ac-
cordance with binding law due to deliberate or gross negligence.
We guarantee our products in accordance with currently valid
legal regulations. If you wish to make a claim under guarantee
please contact the dealer from whom you purchased the product.
7.2 CE conformity declaration
This device has been assessed in accordance with the appropriate European harmonised directives. This means that you are the
owner of a product which, in terms of design and construction, satisfies the protective aims of the European Community for the
safe operation of equipment. A copy of the conformity declaration for the device can be requested from MULTIPLEX Modellsport
GmbH & Co. KG.

7.3 Disposal

Electrical apparatus which bears the cancelled refuse bin sym-
bol must not be placed in the domestic refuse, but taken to a
dedicated disposal system. In EU countries (European Union)
it is prohibited to dispose of electrical apparatus as domestic
waste (WEEE - Waste of Electrical and Electronic Equipment,
Directive 2002/96/EG).
18
The guarantee does not cover malfunctions which are caused by
the following:
· Improper use
· Incorrect or delayed maintenance, or maintenance carried
out by any party other than an authorised service centre
· Incorrect connections
· Use of accessories other than genuine MULTIPLEX / HiTEC
items
· Modifications or repairs not carried out by MULTIPLEX or a
MULTIPLEX Service Centre
· Accidental or deliberate damage
· Defects arising from normal wear and tear
· Operation outside the specified limits, or in conjunction with
components made by other manufacturers.
MULTIPLEX Modellsport GmbH & Co.KG
Westliche Gewerbestraße 1
D-75015 Bretten-Gölshausen - Germany
MULTIPLEX/HiTEC Service: +49 (0) 7252 - 5 80 93 33
You can take your old equipment to your local collection point
(e.g. recycling centre), where it will be recycled in the correct
manner at no cost to you. By recycling your old apparatus you
can make an important contribution to protection of the en-
vironment.