Craftsman CMXEVCVVBVA1612 Manuel D'utilisation page 10

ENGLISH
Fig. 21
32. To remove the foam wet filter, place the
removed power head in an upside down
position, and carefully remove the foam
28
wet filter . Fig. 22.
Fig. 22
33. Use a mild soap and water solution to
wash the foam wet filter
clean water. Fig. 23.
Fig. 23
34. Allow the wet filter to air dry for 24 hours
before installing onto the filter cage.
EMPTYING LIQUID WASTE FROM
THE TANK
35. After wet pick up operation, empty the
10
28
and rinse with
5
collection tank
7
drain cap . Drain liquids into a suitable
receptacle or drain. Fig. 24. Remember to
refit the drain cap to the collection tank.
Fig. 24
STORAGE
Before storing your vacuum, the collection tank
should be emptied and cleaned. The cord can
be wrapped around the cord storage hooks
14
. The accessories should be cleaned and
stored so they can be readily available when
needed. Store the wet/dry vacuum indoors.
For convenient storage, the hose
wrapped around the hose storage rack
and the accessories can be inserted into the
accessory storage slots
REGISTER ONLINE
Thank you for your purchase. Register your
product now for:
• WARRANTY SERVICE: Registering your product
will help you obtain more efficient warranty
service in case there is a problem with your
product.
• CONFIRMATION OF OWNERSHIP: In case of an
insurance loss, such as fire, flood or theft,
your registration of ownership will serve as
your proof of purchase.
• FOR YOUR SAFETY: Registering your product
will allow us to contact you in the unlikely
event a safety notification is required under
the Federal Consumer Safety Act.
Register online at www.craftsman.com/
registration
by unscrewing the
2
18
can be
3
9
on the vacuum.