Touch Control Panel - Hotpoint AQUALTIS AQ114D 69D Mode D'installation Et D'emploi

Touch control panel

WASH CYCLE
SELECTOR
knob
ON/OFF
Button with
indicator light
Button with ON/OFF indicator light: press this briefly to switch
the machine on or off. The green indicator light indicates that the
machine is switched on. To switch off the washing machine during
the wash cycle, press and hold the button for approximately 3
seconds; if the button is pressed briefly or accidentally the machine
will not switch off. If the machine is switched off during a wash
cycle, this wash cycle will be cancelled.
WASH CYCLE SELECTOR knob: may be turned in either
direction. To select the most suitable wash cycle, please refer
to the "Table of wash cycles".
The knob will not move during the wash cycle.
M1-M2-M3 buttons: press and hold one of the buttons to
store a cycle with your own set preferences in the memory
of the machine. To recall a previously-stored cycle, press the
corresponding button.
TEMPERATURE button: press to modify or exclude the
temperature setting; the value selected will appear on the
display above (see "Running a wash cycle").
SPIN CYCLE button: press to modify or exclude the spin
cycle; the value selected will appear on the display above (see
"Running a wash cycle").
DELAYED START button: press to set a delayed start for
the selected wash cycle; the set delay time will appear on the
display above (see "Running a wash cycle").
OPTION buttons: press to select the available options. The
indicator light corresponding to the selected option will remain
lit (see "Running a wash cycle").
WASH CYCLE PHASE icons: these illuminate to indicate the
progress of the wash cycle (Wash
Drain ). The text lights up when the cycle is complete.
START/PAUSE button with indicator light: when the green
indicator light flashes slowly, press the button to start a wash
cycle. Once the cycle has begun the indicator light will remain
lit in a fixed manner. To pause the wash cycle, press the button
M1
M2
DISPLAY
M3
– Rinse – Spin
SPIN
button
TEMPERATURE
button
OPTION
DELAYED START
buttons
button
again; the indicator light will flash in an orange colour. If the
"Door locked" indicator light is switched off, the door may
be opened. To start the wash cycle from the point at which it
was interrupted, press the button again.
DOOR LOCKED
door is locked. To open the door, pause the wash cycle (see
"Running a wash cycle").
CONTROL PANEL LOCK
activate or deactivate the control panel lock, press and hold
the button for approximately 2 seconds. when the indicator
light is illuminated, the control panel is locked. This means
it is possible to prevent wash cycles from being modified
accidentally, especially where there are children in the home.
ECO indicator light: the
washing parameters, an energy saving of at least 10% is made.
Furthermore, before the machine enters "Standby" mode, the
icon will light up for a few seconds; when the machine is switched
off the estimated energy saving will be around the 80% mark.
CHANGE LANGUAGE.
The first time the machine is switched on, the first language
will flash on the display. The " ", "OK" and "V" symbols will
appear on the display, in line with the 3 buttons on the right-
hand side. The languages change automatically every 3";
alternatively, they can be changed by pressing the buttons next
to the " " and "V" symbols. Use the "OK" button to confirm the
language, which will be set after 2". If no buttons are pressed,
the automatic language change will begin again after 30".
To change the language, switch the machine on and off
again; in the 30" time period after it has been switched off,
press and hold the temperature
–
buttons simultaneously for 5''. A short sound alert will be emitted
and the set language will flash on the display. Press the buttons
next to the " " and "V" symbols to change the language. Use the
button next to the "OK" symbol to confirm the language, which
will be set after 2". If no buttons are pressed, the language set
previously will be displayed after 30". Switch on the machine.
START/PAUSE
button
with indicator light
ECO
indicator light
CONTROL PANEL LOCK
button with indicator light
DOOR LOCKED
indicator light
indicator light: indicates that the porthole
button with indicator light: to
icon lights up when, after altering the
+spin +delayed
EN
WASH
CYCLE
PHASE
icons
start
29 29