Description Of The Machine - Hotpoint AQUALTIS AQ114D 69D Mode D'installation Et D'emploi

Description of the machine

EN
PORTHOLE DOOR
PORTHOLE DOOR
HANDLE
KICK STRIP
PORTHOLE DOOR
DETERGENT DISPENSER DRAWER
A
3
1
2
B
B.
3. extra compartment: Bleach
! The use of extra compartment 3 excludes the pre-
wash function.
washing additives compartment: for fabric softener
or liquid additives. We recommend that the maximum
level indicated by the grille is not exceeded, and that
concentrated fabric softeners are diluted.
28
CONTROL
PANEL
ADJUSTABLE FEET
Always use the handle to
open the porthole door (see
figure).
The detergent dispenser
drawer is located inside the
machine and can be accessed
by opening the door.
For more information on
detergent measures, please
refer to the chapter entitled
"Detergents and laundry".
1. pre-wash compartment:
use powder detergent.
! Before pouring in the detergent,
make sure that extra compartment
3 has been removed.
2. main wash compartment:
If liquid detergent is used,
it is recommended that the
removable plastic partition A
(supplied) be used for proper
dosage.If powder detergent is
used, place the partition into slot
DIRECT INJECTION SYSTEM
The washing machine features the innovative "Direct
Injection" technology that quickly solubilises the detergent
and efficiently activates all the various components. The
system guarantees the complete use and dissolution of
the detergent, which is mixed with water before reaching
the garments. This ensures better cleaning results already
at low temperatures, providing significant energy savings
while perfectly protecting colours and fibres. The "Direct
Injection" technology is activated automatically in all the
cycles.
TOUCH CONTROL PANEL
Standby mode
This washing machine, in compliance with new energy
saving regulations, is fitted with an automatic standby
system which is enabled after about 30 minutes if no
activity is detected. Press the ON-OFF
wait for the machine to start up again.
Consumption in off-mode: 0,5 W
Consumption in Left-on: 0,5 W
To adjust the settings, gently
press the icon inside the
sensitive (touch control) area
as illustrated in the figure.
button briefly and