Publicité
Les langues disponibles
Les langues disponibles
LITE
Function F2 - Time programming function
F2 programmes the unit for automatic disconnection in a period of 1 to 9 hours.
Programme by keeping the On/off
select operation time using the
Function F4 - Automatic unit operation
Selecting F4 allows the user to choose the comfort temperature 15ºC to 27ºC (59ºF
to 71ºF), which will be selected from the control panel
control
degrees selected. With this function the unit automatically regulates and controls comfort
temperature by acting on the compressors and fan speed. Pressing the
remote control cancels function F4 and moves to F0 (Manual Function).
Function F6 - ºF Selection
To activate this function, keep the On/off
F6 , and then release the key to directly enable ºF. To return to ºC, keep the control panel
-
key pressed down with the unit switched off, at which point C
stops flashing, press the
when carrying out this operation, meaning it must be registered once finished.
-
+
keys. When selecting, the display will switch between CA and the
+
key on the control panel. The remote control is disabled
key pressed down until F2 is displayed, then
keys and confirm by pressing On/off
key pressed down until the display shows
11
-
+
keys or the remote
key on the
will flash; when it
EN
®
.
Publicité
