Starting Signal Reception Of The Time Signal Manually - ADE CK 1701 Mode D'emploi

3. Press the SET button.
4. Use the UP or DOWN button to set the current hour.
5. Press the SET button.
6. Use the UP or DOWN button to set the current minute.
7. Press SET to end the process.
8. Slide the SET switch to LOCK.
Starting signal reception of the time signal
manually
If the radio signal symbol to the left is no longer
displayed, the radio signals from the time signal
transmitter are no longer being received. The time
indicator nevertheless continues precisely.
− Press and hold the UP button until the radio signal symbol
appears in the display.
‚ If reception was unsuccessful, the reception symbol will
disappear again after a few minutes and the time continues
to be displayed normally.
DCF Radio-controlled alarm clock CK 1701
43