Auto-stop function
If you do not press a button, the alarm switches off automatically
after 60 seconds. After 24 hours, the alarm will be triggered again.
Repeat alarm (snooze function)
− Press the SNOOZE/LIGHT button 1x when the alarm sounds.
The alarm signal becomes silent and
(at alarm time 1).
After a few minutes (depending on the SNOOZE time you set), the
device switches on again and wakes you up again. This procedure
can be repeated multiple times.
Switching the alarm function off and on
1. Slide the SET switch to LOCK.
2. Press the SET button repeatedly until the bell symbol is no
longer displayed: Alarm functions are deactivated.
3. Pressing the SET button again activates the alarm times.
48
DCF Radio-controlled alarm clock CK 1701
flashes in the display
1