Starting Signal Reception Of The Time Signal Manually; Choosing A Location - ADE CK 1708 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 56
Starting signal reception
− Day
− Language (relates exclusively to the weekday indicator)
6. Finally, press time to conclude the procedure.

Starting signal reception of the time signal manually

If the radio signal symbol to the left is no longer displayed, the radio signals
from the time signal transmitter are no longer being received. The time indicator
nevertheless continues precisely.
− Press and hold the WAVE button until the radio signal symbol is displayed again.
The signal reception is thus started manually.
Pay attention to the following:
‚ If the reception was not successful, the reception symbol fades out after a few
minutes and the time on the display continues normally.
‚ Upon successful signal reception, the radio alarm clock adjusts itself to the time
of the time signal transmitter. If you have already made manual settings, these are
automatically adjusted.

Choosing a location

NOTE on material damage
Protect the radio alarm clock from dust, shocks, extreme temperatures,
direct sunlight and moisture. Only place the radio-controlled clock in a dry,
closed room.
‚ Maintain distance from TV sets, computers, and monitors. Base stations of cordless
telephones should also not be in the immediate vicinity of the radio-controlled
alarm clock.
‚ The reception is generally better at night. If the radio alarm clock did not have
reception during the day, it may well be that the signal will be immediately and
fully received at night.
‚ Depending on your location, it may occur in rare individual cases that the
radio alarm clock receives signals from another time signal transmitter or even
alternately from two time signal transmitters. This is not a fault in the device. In this
case, change the location of the radio-controlled alarm clock.
‚ The weather, e.g. a heavy storm, can cause interference with the reception.
‚ Temporary shutoffs of the transmitter can sometimes happen, e.g. because of
maintenance work.
− Place the radio alarm clock as close to a window as possible. Here, the reception
will generally be best.
30
DCF Radio Alarm Clock CK 1708 | CK 1709

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ck 1709

Table des Matières