Start-Up; Receiving The Time Signal - ADE CK 1701 Mode D'emploi

Start-up

1. Slide the locking tab in the direction of the battery
compartment and remove the battery compartment cover.
2. Insert the batteries as shown on the bottom of the battery
compartment. Pay attention to the correct polarity (+/-).
3. Replace the battery compartment cover.
As soon as the batteries are inserted, the alarm clock switches to
reception, see next chapter.
Notes on changing the battery:
‚ Only use the battery type specified in the "Technical Data".
‚ Always replace all batteries.
‚ Dispose of old batteries in an environmentally friendly
manner, see "Disposal".

Receiving the time signal

When the batteries are inserted, all displays are shown for a brief
moment and a beep is heard.
40
DCF Radio-controlled alarm clock CK 1701