Doro R52 Manuel D'utilisation page 34

English
Outgoing Message
The outgoing message is your message to an incoming caller and may be up
to 60 seconds in length.
You may want the message to tell the caller that they may start speaking once the
beep is heard after your outgoing message.
If you choose not to record your own outgoing message the caller will hear a
prerecorded message.
An example of an outgoing message:
-"Hello we are unable to take your call right now, please leave a message at
the sound of the beep and we'll return your call as soon as possible. Thanks
for calling."
Recording an Outgoing Message
1. Press and hold
2. Record your outgoing message (min. 5 seconds). Speak clearly towards the
machine from a distance of 15-20 cm (6-8 inches).
3. Release
8 8
4. The outgoing message will be repeated after a few seconds. Repeat this
procedure if you want to change the message, any old outgoing message will
automatically be erased when a new one is recorded.
Checking the Outgoing Message
Press . The current outgoing message will now be played.
8 8
Please note!
In case of a power failure if no back-up battery is fitted your outgoing message will be erased.
The answering machine will then use the pre-recorded outgoing message.
34
Operation
. You will hear a short beep, and the display will flash.
8 8
to stop recording.
www.doro.com