Doro R52 Manuel D'utilisation page 32

English
About the Answering Machine
The answering machine has to be turned on in order to receive messages. When
a call is received it will be answered after the number of rings selected (please
refer to page 33).
When the answering machine answers an incoming call, the caller will hear your
outgoing message. After a short beep they can then leave a message of up to 60
seconds. Should the caller exceed this limit the call will be disconnected.
The memory will store approximately 50 minutes of incoming messages
(including the outgoing message).
If the answer function is set to A2 mode, the call will be disconnected after the
outgoing message has been played the incoming caller will not be able to leave a
message.
Day/Time Stamp
The answering machine will announce the day of the week and the time when
each message was recorded.
Setting the Day/Time Stamp
1. Press and hold
2. Press repeatedly until the correct day of the week is announced.
9 9
3. Press .
9
4. Press
repeatedly until the correct hour is announced.
9 9
5. Press .
9
6. Press repeatedly until the correct minute/s are announced.
9 9
7. Press
.
9
8. Upon completion the selected settings will be announced.
Checking Current Day/Time
Press . To hear the current settings, e.g.: Thursday, five fifty.
9 9
32
Operation
until the day is announced.
9 9
www.doro.com