Doro R52 Manuel D'utilisation page 35

Playback of messages
The display will show the total number of messages in memory.
Playback will always begin with any new messages, for example if there are three
old messages and two new ones, only the two new ones will be played back, then
the answering machine will return to standby mode.
Press the play button once again to listen to all messages, starting with the
oldest messages.
1. Press
to start playback.
9
2. After each message the day and time the message was received will be
announced, after which a short beep will be heard.
3. When playback is finished you will hear two short beeps, and the machine
will return to standby mode. All incoming messages are saved (unless you
have erased any during playback, see below), new messages will then be
recorded after the old ones.
The following functions are available during playback:
Button
8 8
9 9
!
C
/
{ }
9
Delete Incoming Messages
If you want to delete a single incoming message press C while the message
is playing.
If you wish to erase ALL incoming messages simultaneously play any incoming
messages, then press and hold C until you hear a long beep.
Please note that new messages cannot be deleted until they have been played.
www.doro.com
Operation
Function
Repeat the current message, or hold down until you hear a beep to
step back through the messages.
Skip to next message.
Stop playback.
Erase messages.
Increase or decrease the speaker volume.
Pause during playback (max. 7 seconds). Press
playback.
English
again to resume
9
35