ETNA A4345TRVS Mode D'emploi page 41

INSTALLATION
Mounting
P
L
P
Drilling the Support surface and Fitting the Hood
• The hood support surface must be 229 mm above the bottom
surface of the wall units.
• Saw an opening in the surface for the cooker hood outlet.
• Fit the hood to the surface using the screws.
• Connect the exhaust-air pipe to the motor flange.
501 - 801
598 - 898
Closing element
• The space between the edge of the hood and the rear wall can
be closed by applying the element 'L' provided, using the screws
supplied for this purpose.
14
48.5
42.9
64.5
130.7
42.9
EN 11