Intelligent Warming Plate & Stay Warm Button; Intelligent Warming Plate; Stay Warm Button; Time & Temperature Adjustment - Ninja CM401 Guide De L'utilisateur

INTELLIGENT WARMING PLATE & STAY WARM BUTTON

INTELLIGENT WARMING PLATE

STAY WARM BUTTON

12 ninjakitchen.com
The Intelligent Warming Plate will
automatically turn on during a Half or
Full Carafe size of Classic or Rich brew.
The Intelligent Warming Plate will adjust the
heat it produces to avoid burning
the coffee over time.
IMPORTANT: The HOT SURFACE
indicator will illuminate when the warming
plate is hot.
Press STAY WARM after the brew to turn the
Intelligent Warming Plate off. You can turn
the Intelligent Warming Plate back
on by pressing STAY WARM again.
IMPORTANT: The HOT SURFACE
indicator will remain illuminated until
the warming plate has cooled to a safe
temperature.
TIME & TEMPERATURE ADJUSTMENT
You can adjust how long the Intelligent Warming Plate remains on (up to 4 hours) and/or set
the temperature to High or Low. By default, the Intelligent Warming Plate is set to remain on
for 2 hours, and is set to High to keep your coffee hot. The Low setting keeps your brew at
a slightly lower temperature to preserve flavor longer.
To change the time/temperature settings of your warming plate, follow these instructions:
Press and hold STAY WARM until the clock begins
1
to flash the current warming time.
Quickly press the hour (H) and/or minute (M) buttons to
2
increase the time up to 4 hours or decrease the time to
0 hours. Press STAY WARM to set the new time. Or wait
5 seconds, and the unit will beep, signifying the new
time has been set.
Next, the clock will display the current warming plate
3
temperature. To keep the same temperature, press
STAY WARM, or wait 5 seconds for the same temperature
to lock in. To change the temperature, press the hour (H)
or (M) buttons, then press STAY WARM, or wait 5 seconds
for the temperature to lock in.
NOTE: If you set the warming time to 0 hours, it will skip the
warming temperature menu.
ninjakitchen.com 13