Kenwood KDC-X7200DAB Mode D'emploi page 42

INSTALLATION/CONNECTION
Caution
When installing the antenna cable inside the front
pillar with the air bag installed
• The front pillar cover is secured with a special clip which
may need to be replaced when it is removed.
Contact your vehicle dealer for details on removing the
front pillar cover and availability of replacement parts.
Front pillar
• Install the amplifier unit (G) above the air bag so that it
does not obstruct the operation of the air bag.
(G)
Air bag
38
ENGLISH
Installation overview
The antenna should be installed on the passenger side
for safety.
Clip
Antenna installation
1
Remove the front pillar cover of your car.
Front pillar
2
Clean the windscreen with the supplied
cleaner (I).
(I)
– Wait until the glass surface is completely
dry before proceeding.
– Warm the surface of the windscreen with
defroster if it is cold (during winter).
3
Remove the separator (tag 1) of film
antenna (F) horizontally and paste the
antenna on the windscreen.
Separator (tag 1)
Do not touch the pasting surface (adhesive
side) of the film antenna (F).