Audio Settings - Kenwood KDC-BT720DAB Mode D'emploi

AUDIO SETTINGS

While listening to any source...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following
table), then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
AUDIO CONTROL
SUB-W LEVEL LEVEL –50 to LEVEL +10 (LEVEL 0): Adjusts the
subwoofer output level.
MANUAL EQ The sound elements (frequency level, tone level,
Q factor) are preset into each selection.
62.5HZ LEVEL
BASS
EXTEND
100HZ/160HZ/250HZ/ LEVEL–9 to LEVEL +9 (LEVEL 0): Adjusts the level
400HZ/630HZ/1KHZ/ to memorize for each source. (Before making an
1.6KHZ/2.5KHZ/4KHZ/ adjustment, select the source you want to adjust.)
6.3KHZ/10KHZ/16KHZ
Q FACTOR 1.35/1.50/2.00: Adjust the quality factor.
PRESET EQ NATURAL/ROCK/POPS/EASY/TOP40/JAZZ/
POWERFUL/USER: Selects a preset equalizer suitable
to the music genre. (Select [USER] to use the settings
made in [MANUAL EQ].)
BASS BOOST LEVEL1/LEVEL2/LEVEL3/LEVEL4/LEVEL5: Selects
your preferred bass boost level. ; OFF: Cancels.
.
Default: XX
LEVEL–9 to LEVEL +9 (LEVEL 0): Adjusts
the level to memorize for each source.
(Before making an adjustment, select the
source you want to adjust.)
ON: Turns on the extended bass. ;
OFF: Cancels.
LOUDNESS LEVEL1/LEVEL2: Selects your preferred low and high frequencies boost to
produce a well-balanced sound at a low volume level. ; OFF: Cancels.
SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels.
FADER (Not applicable if 3-way crossover is selected.)
R15 to F15 (0): Adjusts the rear and front speaker output balance.
BALANCE L15 to R15 (0): Adjusts the left and right speaker output balance.
VOLUME OFFSET LEVEL –15 to LEVEL +6 (LEVEL 0): Preset the initial volume level of each
source. (Before adjustment, select the source you want to adjust.)
SOUND EFFECT
SOUND RECNSTR (Not applicable for RADIO source, DIGITAL AUDIO source and AUX source.)
(Sound ON: Creates realistic sound by compensating the high-frequency components
reconstruction) and restoring the rise-time of the waveform that are lost in audio data
compression. ; OFF: Cancels.
SPACE ENHANCE (Not applicable for RADIO source and DIGITAL AUDIO source.)
SMALL/MEDIUM/LARGE: Virtually enhances the sound space. ; OFF: Cancels.
SND REALIZER LEVEL1/LEVEL2/LEVEL3: Virtually makes the sound more realistic. ;
OFF: Cancels.
STAGE EQ LOW/MIDDLE/HIGH: Virtually adjust the sound position heard from the
speakers. ; OFF: Cancels.
DRIVE EQ ON: Boosts the frequency to reduce the noise heard from outside the car or
running noise of the tyres. ; OFF: Cancels.
Depending on the crossover type you have selected ( 5), 2-way crossover
SPEAKER SIZE
or 3-way crossover setting items will be shown. ( 22, 23)
X'OVER
By default, 2-way crossover type is selected.
DTA SETTINGS
For settings, 23, 24, Digital Time Alignment settings.
CAR SETTINGS
• For 2-way crossover: [SUB-W LEVEL]/[SUBWOOFER SET] is selectable only if [SWITCH PREOUT] is
set to [SUBWOOFER]. ( 4)
• [SUB-W LEVEL] is selectable only if [SUBWOOFER SET] is set to [ON].
21
ENGLISH