Digital Radio - Kenwood KDC-BT720DAB Mode D'emploi

DIGITAL RADIO

About DAB (Digital Audio Broadcasting)
DAB is one of the digital radio broadcasting systems available today. It
can deliver digital quality sound without any annoying interference or
signal distortion. Furthermore, it can carry text, pictures and data.
In contrast to FM broadcast, where each program is transmitted on its
own frequency, DAB combines several programs (called "services") to
form one "ensemble."
The "primary component" (main radio station) is sometimes accompanied
by a "secondary component" which can contain extra programs or other
information.
Preparation:
1
Connect the supplied DAB antenna to the DAB antenna jack.
( 34)
2
Press repeatedly to select DIGITAL AUDIO.
3 Press and hold (LIST UPDATE) to start the Service List
update.
"LIST UPDATE" appears and update starts. "UPDATED" appears when
update completes.
Updates take up to 3 minutes. No interruption (such as traffic
information) is possible during updates.
• To cancel the Service List update:
Press and hold (LIST UPDATE) again.
6
ENGLISH
Search for an ensemble
1
Press repeatedly to select DIGITAL AUDIO.
2
Press repeatedly to select DB1/DB2/DB3.
3 Press and hold S / T to search for an ensemble.
4 Press S / T to select an ensemble, service or component to
listen.
• To change the searching method for S / T: Press
repeatedly.
: Press S / T: Select an ensemble, service or component.
AUTO1
Press and hold S / T: Automatically search for an
ensemble.
: Press S / T: Search for a preset station.
AUTO2
MANUAL : Press S / T: Select an ensemble, service or component.
Press and hold S / T: Manually search for an ensemble.
• To store a service: Press and hold one of the number buttons (1 to 6).
• To select a stored service: Press one of the number buttons (1 to 6).
Select a service
1
Press to enter Service Search mode.
2
Turn the volume knob or press
press the knob.
To cancel the Service Search mode, press
/ to select a service, then
again.