Kenwood KDC-BT720DAB Mode D'emploi page 9

GETTING STARTED
P - OFF WAIT Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in
standby mode) to save the battery.
20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes ;
– – –: Cancels
CD READ 1: Automatically distinguishes between audio file disc and music CD. ;
2: Forces to play as a music CD. No sound can be heard if an audio file
disc is played.
F/W UPDATE
UPDATE SYSTEM/UPDATE DAB1/UPDATE DAB2
F/W UP xxxx/ YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
F/W UP xxxxx/ activated).
F/W UP Vxxx For details on how to update the firmware, visit
<www.kenwood.com/cs/ce/>.
FACTORY RESET YES: Resets the settings to default (except the stored station). ;
NO: Cancels
CLOCK
CLOCK DISPLAY ON: The clock time is shown on the display even when the unit is
turned off. ; OFF: Cancels.
ENGLISH
Select the display language for [FUNCTION] menu and music
РУССКИЙ information if applicable.
By default, [ENGLISH] is selected.
ESPANOL
Change the crossover type
1 Press repeatedly to enter STANDBY.
2 Press and hold number buttons 4 and 5 to enter crossover select.
The current crossover type appears.
3 Turn the volume knob to select "2WAY" or "3WAY", then press the
knob.
4 Turn the volume knob to select "YES" or "NO", then press the knob.
The selected crossover type appears.
• To cancel, press and hold
• To adjust the selected crossover settings, ( 22, 23).
Caution
Select a crossover type according to how the speakers are connected.
( 34)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
.
ENGLISH
5