Hitachi DH 40MB Mode D'emploi Et Instructions De Securite page 20

English
2. Anchor hole drilling (Rotation + Hammering)
Adaptor for SDS-plus shank bit
(1) Drill Bit
(SDS-plus shank)
3. Large-dia. hole boring (Rotation + Hammering)
(Guide plate)
Code No.
985388
955169
4. Drilling holes....For drilling metals and wooden materials
(1) 13mm drill chuck
(13VLA)
Code No. 950272
5. Bolt plaching operation with Chemical Anchor (Rotation + Hammering)
(Standard socket
on the market)
6. Crushing (Hammering)
(1) Bull point
Overall length
11" (280 mm)
15-3/4" (400 mm)
20
(2) Adaptor for SDS-plus shank bit
(SDS max shank) Code No. 313465
(2) Core bit
(1) Center pin
External dia.
Code No.
955165 2" (50 mm)
4-1/8" (105 mm)
(2) Chuck adaptor
(SDS max shank)
Code No. 313468
(3) Chuck wrench
Code No. 930515
(1) Chemical Anchor Adaptor
(SDS max shank)
Square dimensions of the side
of the socket installation
Code No.
313471
313472
(3) Core bit shank
(SDS max shank)
Code No.
313467
1/2" (12.7 mm)
3/4" (19.0 mm)
Code No.
313469
313470