Accessories; Standard Accessories; Optional Accessories - Hitachi DH 40FB Mode D'emploi Et Instructions De Securite

English
WARNING:
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

(1) Case (Molded plastic) (Code No. 313097) ............................................................. 1
(2) Side Handle (Code No. 313078) ............................................................................. 1
(3) Stopper (Code No. 971786) .................................................................................... 1
(4) Allen Wrench 4 mm (Code No. 944458) ................................................................ 1
(5) Allen Wrench 5 mm (Code No. 944459) ................................................................ 1
(6) Hammer Grease A (Code No. 981840) .................................................................. 1
(7) Dust Cover (Code No. 993245) .............................................................................. 1

OPTIONAL ACCESSORIES.....

For accessories in detail please call HITACHI AT 1-800-59-TOOLS
1. Through-hole drilling (Rotation + Hammering)
(1) Drill bit (Spline shank)
External dia.
1/2" (12.7 mm)
1" (25.4 mm)
1-1/2" (38.1 mm)
2. Anchor hole drilling (Rotation + Hammering)
(1) Drill bit
(Taper shank)
18

ACCESSORIES

Accessories for this power tool are mentioned in this Instruction
Manual.
The use of any other attachment or accessory can be dangerous
and could cause injury or mechanical damage.
sold separately
Overall length
16"(400 mm)
(3) Cotter (Code No. 944477)
(2) Taper shank adaptor
(Spline shank)
Code No.
985374
985375
985376