Installation Requirements; Location Requirements; Product Dimensions - KitchenAid 720-0954R Instructions D'installation Et Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Location Requirements

Select a location that provides minimum exposure to wind and
traffic paths. The location should be away from strong draft
areas.
Do not obstruct flow of combustion and ventilation air.
Clearance to combustible construction for grill:
A minimum of 36" (91 cm) must be maintained between
the front of the grill hood, sides and back of the grill and
any combustible construction.
A 36" (91 cm) minimum clearance must also be maintained
below the cooking surface, and the grill shall not be used
under overhead combustible construction.
Rotisserie (accessory is not included)*
If you equip your grill with a rotisserie, a 6" (15.2 cm) minimum
clearance is needed for the rotisserie motor.
A grounded, 3-prong outlet located to the left of the grill is
required.
*See "Assistance" section to order.

INSTALLATION REQUIREMENTS

Product Dimensions

The model/serial number rating plate is located on the inside of
the left cabinet door. See the following illustration.
A
A.
Model/serial number plate
37

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

720-0954r lp730-0954r730-0954r ng

Table des Matières