CDVI Simply 230V Manuel D'installation page 6

INSTALLATION MANUAL INSTALLATION MANUEL
SIMPLY
GALEO
Illuminated RF Keypad
Automation for sliding gates
Place the plate provided (Fig. 1) at a
distance of 50 mm from the edge of the
gate and perfectly square with angle of 90 °.
Before fixing the plate with cement, dowels
or other, pass the cable sheath
by the pre-drilled holes.
Position the gearmotor and fix it with the
supplied screws and washers A (Fig.2).
Fix securely the rack on the gate,
providing a distance of 2 to 3 mm from
the motor pinion (Fig.3).
Fix the stop plates (Cams G) of the motor
on the rack, (Fig. 4)
Unblocking procedure
1. Insert the supplied key into the special
cylinder and turn the key.
2. Pull the lever up to the stop
6
erone.com
Counterplate
Holes for cable
passage
Blocked
Track
Wheel
Released
EN