Kenwood KDC-210U Mode D'emploi page 13

Wiring connection
Rear/subwoofer output
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis
of the car
Battery
White
Blue/White
White/Black
(Power control wire)
Gray
Gray/Black
Green
Brown
Green/Black
(Mute control wire)
Purple
Purple/Black
Red
Blue
(Ignition wire)
(Antenna control wire)
Yellow
(Battery wire)
Fuse (10 A)
If no connections are made, do not let the wire
come out from the tab.
To the power control terminal when
using the optional power amplifier,
or to the antenna control terminal in
the vehicle.
To the terminal that is grounded
when the telephone rings or during
conversation. (To connect the
Kenwood navigation system, refer
your navigations manual.)
(Not used)
Part list for installation
A Faceplate
B Trim plate
C Mounting sleeve
D Wiring harness
E Extraction key
ENGLISH | 13