Audio Settings - Kenwood KDC-BT640U Mode D'emploi

AMAZON ALEXA
(for
2
Communicate with Alexa via the connected microphone. (Page 15)
"THINKING..." appears when Alexa is processing your voice input.
"SPEAKING..." appears while Alexa is responding to your voice input.
"ALEXA" or display information such as playing time, song title, etc.
appears while Alexa is in idle state.
• To return to the previous source before ALEXA, press B SRC.
• To activate Alexa, press .
• To cancel current listening state, press .
• To cancel current thinking/speaking states and go to listening state,
press .
• Only one Alexa connection can be connected at one time.
• "DISCONNECTED" appears if the unit is disconnected from Alexa mobile
application or the Bluetooth connection is disconnected.
Start listening
While in Alexa idle state...
1
Press on the unit to activate Alexa.
The display shows: "LISTENING...".
2
Communicate with Alexa via the connected microphone. (Page 15)
3
During music playback in ALEXA source, you can perform the
following operations:
To
Play back/pause
Reverse skip/Forward skip
During music playback, press to pause the music and activate Alexa. You
can now start to communicate with Alexa.
22
ENGLISH
)
On the faceplate
Press 6 IW.
Press S / T.

Audio Settings

1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected or activated.
4
Press and hold to exit.
To return to the previous setting item, press
[AUDIO CONTROL]
[SUB-W LEVEL] [LEVEL –50] to [LEVEL +10] ([LEVEL 0]): Adjusts the subwoofer output
level.
[EASY EQ] Adjusts your own sound settings.
• The settings are stored to [USER] in [PRESET EQ].
• The settings made may affect the current settings of [MANUAL EQ].
[SW]: [LEVEL –50] to [LEVEL +10]
[BASS]: [LEVEL –9] to [LEVEL +9]
[MID]: [LEVEL –9] to [LEVEL +9]
[TRE]: [LEVEL –9] to [LEVEL +9]
.
Default: [XX]
(Default: [LEVEL 0]
[LEVEL 0]
[LEVEL 0]
[LEVEL 0])