Technical Data; Technical Description - LA NORDICA MARIAROSA Manuel Utilisateur

TECHNICAL DATA

Definition in accordance with EN
Constructive system
Nominal power in kW
Efficiency in %
smoke outlet diameter in mm
Chimney height ≥ (m) - dimension (mm)
Chimney draught in Pa (mm H
Hourly consumption in kg/h
CO measured at 13% oxygen in %
Exhaust gas emission in g/s – wood
Exhaust gas temperature in °C - wood
Hearth opening size in mm (W x H)
Hearth size in mm (W x H x D)
Oven size in mm (W x H x D)
Type of grill
Height in mm
Width in mm
Depth in mm
Weight in kg
Fire prevention safety distances
heatable m (30 kcal/h x m
3
(*) The proposed value are indicative. The installation must, in any case, be sized and verified according to the general calculation method in UNI
EN13384-1 or by another method of proven efficiency.
(**) For those buildings in which the thermal insulation does not correspond to the instructions on heat protection, the heating volume of the
product is: favourable type of building (30 kcal/h x m
x m ).
3
With thermal insulation in accordance with the regulations regarding energy saving, the heated volume is greater. With temporary heating, in
the event of interruptions which last more than 8 hours, the heating capacity is reduced by about 25%.
The declared technical data have been achieved by burning beech wood class "A1" according to the requirement UNI EN ISO 17225-5 and wood
moisture content less than 20%. By burning a different kind of wood the efficiency of the product itself could change and some specific adjustments
on the appliance could be needed.

TECHNICAL DEsCRIPTION

The chimney stoves of La NORDICA are suitable to heat living spaces for some periods, or to support an insufficient centralized heating system.
They are ideal for holiday apartments and weekend houses or as an auxiliary heating system during the whole year.
As fuel, wood logs are used. The appliance works as an intermittent operating appliance.
The stove is equipped with a heat ACCUMULATOR in refractory material, which releases heat for a certain amount of time even after the
shutdown. The cast-iron grid installed on the closure door of the ACCUMULATOR
The stove is made of sheets of metal in galvanized steel, enamelled cast iron and, depending on the model, thermo radiant ceramics or
soapstones.
The hearth is internally sheathed with single sheets in cast iron and inside it there is a turning and extractable grate; the back side is extractable.
Thanks to some calibrated holes made over that side, the supply of pre-heated air inside hearth is guaranteed and having, in this way, a post-
combustion which increases the yield and reduces gas output. Inside there is a flat grate.
The hearth is equipped with a panoramic door with ceramic glass (resistant up to 700 °C). This allows a wonderful view on the burning flames.
Furthermore, it is thus avoided the output of sparks and smoke.
The stove is equipped with an extractable wood drawer, with the related closing door (C).
As an OPTIONAL it is available a height-adjustable grate. The upper position optimizes the Radiant-plate function, the lower one the HEAT
ACCUMULATOR.
ACCEssORIEs
The heating of the environment is made by irradiation: the heat is radiated into the environment through the panoramic glass, the external
hot surfaces of the stove and through the heat accumulation provided by the stove itself.
O)
2
(wood with 20% humidity)
)
3
); less favourable type of building (40 kcal/h x m
3
Poker
INCLUDED
Picture 6
D helps the irradiation of heat in the ambient.
Glove
INCLUDED
ENgLIsH
MARIAROsA
EN 13240
2
8,6
87,6
150
(*) 4 - 200x200 Ø200
12 ( 1,2 mm H O)
2
2,3
0,09 - ( 1125 mg/m )
3
6,1
221
223 x 265
270 x 320 x 362
-
Movable - flat
851
1030
650
Chapter DIMENSIONS
Chapter FIRE SAFETY
246 (**)
); unfavourable type of building (50 kcal/h
3
Height-adjustable cast iron grate
OPTIONAL
23