Gewiss R-EVolution Parking+ GW68105 Manuel D'installation Et Usage page 29

Operation
If the reading is correct, and after pressing the number of a free Socket, the charging station goes into
waiting to charge status. An image of a plug flashes on the display.
3. Raise the cover manually, if you want to use one of the interior connectors, and connect the cable into the
desired socket. If you want to use one of the exterior connectors, open the protective covers and connect
the charging cable.
Depending on the connector type used, the operation may vary slightly:
Connector type
CEE 7/4 Type F (Schuko)
IEC 62196-2 Type 2
The station locks the cover when it is completely closed and starts to supply energy to the vehicle, switching to the
charge status.
Ending the charge process
4. To conclude the charge cycle, pass the cart to the reader and select the Socket in which you want to
complete the charge process. The station interrupts the electrical supply and unlocks the cover of the
receptacle or the connector.
ABA2022IQM01_ - 7.55.4.183.9 - Installation and Operation Manual
Connection detection
Automatic detection after lowering the
cover
Instant automatic detection
Regulation governing the charge
sequence
IEC61851
IEC61851
Gewiss
EN
ES
FR
IT
29