Connecting The Power To The Unit - Gewiss R-EVolution Parking+ GW68105 Manuel D'installation Et Usage

Gewiss
Bottom trim
1. Install the bottom trim in the ground using four threaded components.
2. Install the charging station on the trim. Fasten the joint using nuts and washers.

7.4. Connecting the power to the unit

Cabling requirements
The connection must meet certain requirements:
Connection specifications
Connection type
Number of conductors
Nominal current
Conductor maximum diameter
20
Single phase
2P + E
up to 64 A
16 mm (2 x 10 mm
2
ABA2022IQM01_ - 7.55.4.183.9 - Installation and Operation Manual
Installing and connecting the unit
Three phase
3P + N + E
up to 64 A
)
2