TECHNICAL DATA
Definition in according to:
Constructive system
Nominal thermal power in kW
Efficiency in %
Smoke outlet diameter in mm
Chimney height ≥ (m) - dimension (mm)
Depression by rating calorific value in Pa - wood
Hourly consumption in kg/h (wood with 20% humidity)
CO measured at 13% oxygen in %
Exhaust gas emission in g/s - wood
Exhaust gas temperature in °C - wood
Outer air inlet Ø in mm (minimum surface cm
Hearth opening size in mm (W x H)
Hearth size in mm (W x H x D)
Oven size in mm (W x H x D)
Type of grill
Height in mm
Width in mm
Depth in mm
Weight in kg
Fire prevention safety distances
riscaldabili (30 kcal/h x m
m
3
(#) For those buildings in which the thermal insulation does not correspond to the instructions on heat protection, the heating volume
of the stoves is:favourable type of building (30 kcal/h x m
of building (50 kcal/h x m
With thermal insulation in accordance with the regulations regarding energy saving, the heated volume is greater. With temporary
heating, in the event of interruptions which last more than 8 hours, the heating capacity is reduced by about 25%.
The declared technical data have been achieved by burning beech wood class "A1" according to the requirement UNI EN ISO 17225-
5 and wood moisture content less than 20%. By burning a different kind of wood the efficiency of the product itself could change and
some specific adjustments on the appliance could be needed.
GENERAL PRECAUTIONS
La NORDICA S.p.A. responsibility is limited to the supply of the appliance.
The installation must be carried out scrupulously according to the instructions provided in this manual and the rules of the profession.
Installation must only be carried out by a qualified technician who works on behalf of companies suitable to assume the entire
responsibility of the system as a whole. La NORDICA S.p.A. declines any responsibility for the product that has been modified
without written authorisation as well as for the use of non-original spare parts.
It is OBLIGATORY to respect the National and European rules, local regulations concerning building matter and also
fireproof rules.
NO MODIFICATIONS CAN BE CARRIED OUT TO THE APPLIANCE. La NORDICA S.p.A. cannot be held responsible
for lack of respect for such precautions.
DECLARATION OF CONFORMITY OF THE MANUFACTURER
Object: Absence of asbestos and cadmium
We declare that the materials used for the assembly of all our appliances are without asbestos parts or asbestos derivates and that
in the material used for welding, cadmium is not present, as prescribed in relevant norm.
Object: CE n. 1935/2004 regulation.
We declare that in all products we produce, the materials which will get in touch with food are suitable for alimentary use, according
to the a.m. CE regulation.
)
2
)
(#)
3
).
3
Rossella Plus Forno EVO
EN 13240
1
9.1
86
130
12 ( 1,2 mm H
O)
2
2,4
0,07 - 777 mg/m
7.0
215
120 (100 cm
)
2
355 x 245
379 x 370 x 327
330 x 300 x 370
1359
559
536
260
); less favourable type of building (40 kcal/h x m
3
ENgLIsH
Nicoletta Forno EVO
EN 13240
1
9.1
86
130
4 - 200x200 Ø200
12 ( 1,2 mm H
2,4
0,07 - 777 mg/m
3
7.0
215
120 (100 cm
355 x 245
379 x 370 x 327
330 x 300 x 370
Movable - flat
1423
587
572
Chapter FIRE SAFETY
260
); unfavourable type
3
O)
2
3
)
2
21