S&P TD-100 Instructions De Montage page 6

All models include a robust mounting bracket which enables easy and quick installation of the fan. See Figure (2) Installation
Diagrams For TD - MIXVENT Duct Fans.
Ductwork connection should be made with duct tape or duct fast-clamps (available through your local distributor) to ensure a good
seal and secure connection.
ELECTRICAL CONNECTION
All TD - MIXVENT series fans operate from a standard 120V 60Hz A.C electrical supply. All wiring must be carried out in accordance
with National Electrical Code and all applicable state and local buildings codes.
Electrical connections should be made in accordance with the following diagrams: Figure (3) Electrical Wiring.
MAINTENANCE
IMPORTANT: BEFORE CARRYING OUT ANY MAINTENANCE OR SERVICING, ENSURE THE UNIT IS DISCONNECTED FROM
THE MAIN ELECTRICAL SUPPLY.
All TD - MIXVENT series exhaust fans incorporate sealed for life bearings and therefore do not require any lubrication. We would
recommend inspection of the product at least once every twelve (12) months to avoid the excessive accumulation of dust and dirt on
the impeller. To inspect the unit disconnect from electrical supply and remove from ducting. If any debris is evident on the impeller
clean with a damp (not wet) cloth. DO NOT USE any detergents or abrasive materials for cleaning.
WARRANTY
Soler & Palau USA - Soler & Palau Canada warrant that the TD - MIXVENT series exhaust fan will be free from defective materials
and workmanship for the period of (5) years from the date of original purchase. In the event that we find any part is defective the
product will be repaired or, in the Company's discretion, replaced without charge provided that the product has been installed in
accordance with the enclosed instructions and all applicable EPA Standards and state and local building codes. Soler & Palau TD Bath
Kits have an extended warrranty period of (7) years from the date of original purchase.
IF CLAIMING UNDER WARRANTY
Please return the complete product, freight paid, to you local authorized distributor. All returns must be accompanied by a valid Bill
Of Sale. All returns must be clearly marked "Warranty Claim," with an accompanying description stating the nature of the fault.
THE FOLLOWING WARRANTIES DO NO APPLY
Damages from shipping, either concealed or visible. Claim must be filed with the carrier.
Damages resulting from improper wiring or installation
Damages caused by acts of nature, or resulting from improper consumer procedures such as: Improper Maintenance; Misuse; Neg-
ligence; Alteration; Abuse; Abnormal Use; or Accident or Incorrect Electrical Voltage and Current.
Removal or alteration to the Soler & Palau USA - Soler & Palau Canada data plate label.
WARRANTY VALIDATION
The end user must keep a copy of the Bill of Sale to verify purchase date.
THE ABOVE FIVE (5) YEAR WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, WRITTEN OR
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE. IN NO EVENT SHALL SOLER &
PALAU USA - SOLER & PALAU CANADA BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, IN-
CLUDING LOSS OF PROPERTY, REVENUES, LOST PROFITS, COSTS OF REMOVAL, INSTALLATION OR REINSTALLATION.
6