NEC MultiSync LCD1990SXp Manuel D'utilisation page 24

Advanced OSM Controls
Tag 7 COLORCOMP
continued continued
COLORCOMP LEVEL
Tag 8 LANGUAGE
OSM H.POSITION
OSM V.POSITION
OSM TURN OFF
OSM LOCK OUT
NOTE: Using the COLORCOMP feature does reduce the
overall peak luminance of the display. If greater luminance
is desired over the uniform performance of the display, then
COLORCOMP should be turned off.
Select the level for ColorComp adjustments.
OSM control menus are available in eight languages. Press
"Left" or "Right" to select.
You can choose where you would like the OSM control image
to appear on your screen. Selecting OSM Position allows you
to manually adjust the location of the OSM control menu left, or
right.
You can choose where you would like the OSM control image
to appear on your screen. Selecting OSM Position allows you
to manually adjust the location of the OSM control menu up, or
down.
The OSM control menu will stay on as long as it is in use. You
can select how long the monitor waits after the last touch of a
button to shut off the OSM control menu. The preset choices are
10-120 seconds by 5 seconds increments. Press "Left" or "Right"
to select.
This control completely locks out access to all OSM control
functions. When attempting to activate OSM controls while in
the Lock Out mode, a screen will appear indicating the OSM
controls are locked out.
There are four ways to use OSM LOCK OUT function:
1: OSM LOCK OUT with BRIGHTNESS and CONTRAST
control: This mode locks all OSM functions except for
BRIGHTNESS and CONTRAST.
To activate, press the SELECT and "Up" buttons
simultaneously, while in the OSM menu.
To deactivate, press the SELECT and "Up" buttons
simultaneously, while in the OSM menu.
2: OSM LOCK OUT with no control: This mode prevents access
to all OSM functions. To activate, press the SELECT and
"Right" buttons simultaneously. To deactivate, press the
SELECT and "Right" buttons simultaneously, while in the OSM
menu.
3: OSM LOCK OUT with BRIGHTNESS (only) control: This
mode locks all OSM functions except for BRIGHTNESS.
To activate, press the SELECT, "Left" and "Down" buttons
simultaneously, while in the OSM menu.
To deactivate, press SELECT, "Left" and "Down" buttons
simultaneously, while in the OSM menu.
4: CUSTOM: Press RESET and EXIT to enter the CUSTOM
Menu. Select ENABLE or DISABLE for: POWER KEY, INPUT
SEL, HOT KEY (BRIGHTNESS/CONTRAST), ECO MODE,
WARNING (RESOLUTION NOTIFIER/OSM LOCK OUT).
To Deactivate the OSM Lock Out function, press RESET and
EXIT to bring up the LOCK OUT warning. Press SELECT,
SELECT, <, >, <, >, EXIT.
22
- continued