Introduction Of Advanced Built-In Cd Player Operation; Repeating Play; Playing Tracks In Random Order - Pioneer Super TunerIII D DEH-P7800MP Mode D'emploi

Syntoniseur fm/am et lecteur de cd/mp3/wma/ aac, “puissance élevée ”, avec contrôleur pour lecteur de cd à chargeur et dsp
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Section
Built-in CD Player
05
Introduction of advanced
built-in CD player operation
1 Function display
Shows the function status.
1
Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3
Turn MULTI-CONTROL to select the
function.
Turn MULTI-CONTROL clockwise or counter-
clockwise to switch between the functions in
the following order:
Play mode (repeat play)—Random mode
(random play)—Scan mode (scan play)—
Pause (pause)—Search mode (search meth-
od)—Title Input (disc title input)—Jacket art
(jacket art read)
# To return to the playback display, press BAND.
Notes
! When playing a CD TEXT disc, you cannot
switch to Title Input. The disc title will have
already been recorded on a CD TEXT disc.
! When playing audio data (CD-DA), it is not ef-
fective even if you turn Jacket art on. (Refer to
page 29.)
20
En
1 1 1
! If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the playback display.

Repeating play

There are two repeat play ranges for the built-
in CD player: Disc repeat (disc repeat) and
Track repeat (one-track repeat).
1
Use MULTI-CONTROL to select
Play mode in the function menu.
Play mode appears in the display.
2
Press MULTI-CONTROL to select the re-
peat range.
Press MULTI-CONTROL repeatedly until the
desired repeat range appears in the display.
! Disc repeat – Repeat the current disc
! Track repeat – Repeat just the current
track
Note
If you perform track search or fast forward/re-
verse during Track repeat, the repeat play range
changes to Disc repeat.

Playing tracks in random order

Random play lets you play back tracks on the
CD in a random order.
1
Use MULTI-CONTROL to select
Random mode in the function menu.
Random mode appears in the display.
2
Press MULTI-CONTROL to turn random
play on.
Tracks will play in a random order.
# To turn random play off, press
MULTI-CONTROL again.

Publicité

Chapitres

Table des Matières
loading

Table des Matières