Publicité
Les langues disponibles
Les langues disponibles
Replacing the lamps
Please allow the lights to cool down sufficiently
before touching them. Cover and protect delicate
surfaces underneath the hood when changing
lamps
Replace the lamps:
• attach the suction device to the lamp
• pull towards you
• put a new lamp in place using the same suction
device
The hoods have 2 lamps of the following type:
12V/20W/Ø35/GU4/38° (order number 7401.029).
Total energy consumption with lightning:
810, 811: 210 W
820, 821: 380 W
Electrical connection
Electrical output: electrical cord + plug with
ground. To be plugged into socket with ground.
Check for compatibility with information on type
plate (behind filter).
Socket must be within reach.
Changes or replacement of the electrical cord
should be performed by a professional only.
EN 17
Publicité
