General Technical Data; Technical Data Table; Instructions For Installation; Installation - Lotus PCIT-64ET Instructions Pour L'installation Et L'emploi

Plan de cuisson à induction triphasé

Masquer les pouces Voir aussi pour PCIT-64ET:

Instructions pour l'installation et l'emploi (28 pages)

Table des Matières

Les langues disponibles

The data plate is on the front (see diagram in electric connection item) and has all the data necessary for the connection.

When fitting, the appliance must be leveled using a spirit level; slight differences of level can be adjusted by screwing

or unscrewing the adjustable feet. The main switch or the socket must be near the appliance and easily accessible.

It is advisable to place the appliance under an extractor hood so that steam is extracted rapidly. If the appliance is placed

near walls, dividing panels, kitchen furniture, decorative finishes, etc., these should be in flameproof material; otherwise

it is necessary to cover them with non-flammable material.

Above all, it is necessary to ensure that fire prevention standards are observed.

Always comply with the following points during installation:

Ensure that mains voltage complies with the voltage indicated on the specification table of the

appliance

All electrical installations must comply with local standards. All standards issued by national electrical authorities

must be complied with.

When circuit breakers are used, they must be suitable for a minimum of 30 mA.

Avoid obstruction of air intakes or outlets with objects (fabric, walls, etc).

Keep hot air off of the induction appliance (for example when several appliances are next to one another, or behind one

another, or when an appliance is separated by a separate air duct.

The induction appliance must not be placed near or on hot surfaces.

-The appliance is equipped with a filter. Regardless of this filter, make sure that grease from other

activities do not get onto the induction appliance (for example from nearby fryers or hot plates).