The Flybar - iKarus Lama Manuel D'utilisation

First press the flybar
seesaw into the center
hub until it clicks into
the the notches a n d
then press the push-
rod eyelet over one of
the balls on the rotor
head (Pict. 1 and 2).
Before every flight, please check the proper seating of the flybar weights.
Pict. 3
1.
4.
Assembly of the paddle weights:
1. Slide the black plastic sleeve onto the flybar.
2. Turn the sleeve by 90º.
3. Slide the sleeve back for the hook to engage into the 1.2 mm hole in the
sleeve.
4. Slide the paddle weight into the inner opening of the sleeve.

The Flybar

Pict. 1
2.
3.
22
Pict. 2
Hole 1.2 mm
dia.