Introduction; Technical Specification - iKarus Lama Manuel D'utilisation

The Lama consists of several mechanical components (helicopter chassis,
electric motors, pushrods, rotor blades) and the electronic equipment (receiver,
servos, electronic mixer, gyro and transmitter). Just like a full size helicopter,
the Lama can move around all axes and fly in any direction. The special design
allows you to enjoy the first successful flights soon.
Attention! Read the entire manual before attempting your first flight!
This model helicopter is not a toy. Building and especially operating it requires
special knowledge. Mistakes and sloppiness during assembly, maintenance
and operation may cause damage to property and/or persons. Even as this
helicopter comes preassembled, it is your responsibility to check before every
flight that all components are assembled properly and are undamaged. Make
yourself aware of any possible dangers as you are responsible for the correct
maintenance and operation of this model helicopter.
Technical Specifications
Helicopter:
Length :
Fuselage Width: 90 mm (3.5 in)
Heigth:
Weigth:
Battery:
7,4 V, 800 mAh, Lithium-Polymer

Introduction

430 mm (16.9 in)
170 mm (6.7 in)
225 g (8 oz)
1
Remote Control:
Channels:
RF Modulation:
Operation Voltage:
Current Consumption: approx. 150 mA
21
4
FM
9,6 - 12 V