Grill Function; Combi Function - ETNA CM125HRVS Mode D'emploi

CONTROLS

Grill function

Combi function

You can stop or cancel a running programme by opening the door
or pressing the stop button. In order to start the programme again,
press the start button.
• If you want to cancel the programme entirely, press the stop
button again.
The current time appears in the display.
You can heat dishes with the grill function and brown them without
using the microwaves.
1. Press once on the combi button.
'G-1' flashes in the display.
• Press again (a number of times) on the combi button if you
wish to select a different function.
• You can use the control dial to select another function by
turning the dial.
2. Press the start button.
The selected function is now confirmed.
3. Turn the control dial to set the time.
The display indicates the set time.
4. Press the start button again.
The microwave switches on and the set time counts down in
the display. The grill symbol flashes in the display.
• Half-way through the grill time a double-beep signal sounds
to indicate that the dish needs to be turned over. Open the
door, turn the dish over, close the door and press the start
button.
• When the set time has been reached, the current time
appears again in the display, and you will hear 5 beeps.
EN 11