Quick Start; Stop - ETNA CM125HRVS Mode D'emploi

CONTROLS
Display
P100 100 % - 900 W
P 80
P 50
P 30
P 10

Quick start

Stop

EN 10
Power output Food
- Boiling water, warming up
- Cooking chicken, fish and vegetables
80 % - 720 W - Warming up
- Cooking mushrooms and seafood
- Cooking dishes containing egg and cheese
50 % - 450 W - Cooking rice and soup
30 % - 270 W - Defrosting
- Melting chocolate and butter
10 % - 90 W - Defrosting delicate/fragile dishes
- Defrosting irregularly-formed dishes
- Making ice-cream softer
- Allowing dough to rise
1. Press the microwave button.
'P100' flashes in the display.
• Press again (a number of times) on the microwave button if
you wish to set another power.
• You can use the control dial to select another power by
turning the dial.
2. Press the start button.
The selected power is now confirmed.
3. Turn the control dial to set the time.
The display indicates the set time.
4. Press the start button again.
The microwave switches on and the set time counts down in
the display. The microwave symbol flashes in the display.
• When the set time has been reached, the current time
appears again in the display, and you will hear 5 beeps.
With one press of the start button you can start the microwave
on full power for 30 seconds. If you press more times on the start
button, the time will increase in steps of 30 seconds to a maximum
of 95 minutes.
You can also first turn the control dial to the left to set a time. Then
press the start button and the microwave will switch on on full
power for the set amount of time.